Getting Started; Somatxr Overview - HBM SomatXR MX Series Quick Start Manual

Ultra-rugged daq
Hide thumbs Also See for SomatXR MX Series:
Table of Contents

Advertisement

Available languages

Available languages

1 Getting Started

MX Modules

1.1 SomatXR Overview

The SomatXR Ultra-Rugged DAQ series is a modular and universally applicable
measurement system. The modules of this family can be individually combined and
intelligently connected according to the measurement task. The distributed operation
makes it possible to position individual modules close to the measuring points,
resulting in short sensor lines.
The SomatXR Ultra-Rugged DAQ series consists of the following modules:
MX Modules: The SomatXR MX modules are front end data sourcing modules
l
that can be used with the CX23-R Data Processor or the catmanAP and MX
Assistant software applications. They are configurable to interface to a diverse
range of transducers and sensors. Generic features for most MX modules include
precision measurement capabilities using 24 bit ADCs, TEDS sensor support and
multiple digital filtering options.
The following SomatXR MX modules are currently available:
MX1601B-R Standard Module: Up to 16 configurable inputs for DC voltage
o
sources (60 V, 10 V, 100 mV), DC current sources (20 mA) or current-fed
piezoelectric transducers (IEPE, ICP®).
MX1609KB-R Thermocouple Module: Up to 16 type K thermocouples (NiCrNi)
o
for measuring temperatures.
MX1615B-R Bridge Module: Up to 16 individually configurable inputs, including
o
strain gage-based transducers, standardized voltage and resistance or
resistance-based measurements.
MX840B-R Universal Amplifier: Up to eight (8) universal inputs for connecting
o
more than 16 transducer technologies including one connector compatible with
CAN inputs. (MX840B-R CAN is not supported by the CX23-R Data
Processor.)
MX411B-R Highly Dynamic Universal Amplifier: Up to four (4) inputs, including
o
strain gage and inductive bridges, standardized voltage and DC current
sources (20 mA) or current-fed piezoelectric (IEPE, ICP®) and piezoresistive
transducers.
MX471B-R CAN Module: Up to four (4) independent CAN bus nodes
o
electrically isolated from each other and from the power supply.
CX23-R Data Processor: The CX23-R hosts its own secure web-based data
l
recorder for intuitive and easy-to-use test setup, control, monitoring and data
visualization. The acquired test data is stored in the efficient and robust SIE file
format using a high-speed SATA storage drive. In addition, the CX23-R provides
A4087-4.0 en/de HBM:Public.
1   Getting Started
8

Advertisement

Chapters

Table of Contents
loading

Table of Contents