HBM SomatXR MX Series Quick Start Manual page 8

MX Modules
As automation plant operating personnel, you have been instructed how to handle
l
the machinery and are familiar with the operation of the modules and technologies
described in this documentation.
As commissioning engineers or service engineers, you have successfully
l
completed the training to qualify you to repair the automation systems. You are
also authorized to activate, to ground and label circuits and equipment in
accordance with safety engineering standards.
It is also essential to comply with the legal and safety requirements for the
application concerned during use. The same applies to the use of accessories.
Markings used
The following symbols may be found on the module:
Meaning: Electrostatic sensitive device
Devices marked with this symbol can be damaged beyond repair by electrostatic
discharge. Please observe the handling instructions for components exposed to the
risk of electrostatic discharge.
Meaning: CE mark
The CE mark enables the manufacture to guarantee that the product complies with
the requirements of the relevant CE directives (the declaration of conformity is
available at www.hbmdoc.com).
Meaning: Statutory waste disposal mark
National and local regulations regarding the protection of the environment and
recycling of raw materials require old equipment to be separated from regular
domestic waste for disposal.
For more detailed information on disposal, please contact local authorities or the
dealer from whom you purchased the product.
The following symbols may be found in this manual.
WARNING
Meaning: Dangerous situation
Warns of a dangerous situation in which failure to comply with safety
requirements can result in death or serious bodily injury.
CAUTION
Meaning: Potentially dangerous situation
Warns of a potentially dangerous situation in which failure to comply with safety
requirements could result in bodily injury or damage to property.
A4087-4.0 en/de HBM:Public.
Safety instructions
6