Toyota RAV4 PHEV 2023 Owner's Manual page 589

Quantity
Nominal voltage
Lubrication system
Oil capacity (Drain and refill  reference
■
With filter
Without filter
*
: The engine oil capacity is a reference quantity to be used when changing the
engine oil. Warm up the engine and turn off the hybrid system, wait more than 5
minutes, and check the oil level on the dipstick.
■
Engine oil selection
"Toyota Genuine Motor Oil" is used
in your Toyota vehicle. Toyota rec-
ommends the use of approved
"Toyota Genuine Motor Oil".
Another motor oil of matching qual-
ity can also be used.
Oil grade:
0W-16:
API grade SN "Resource-Conserv-
ing", SN PLUS "Resource-Conserv-
ing" or SP "Resource-Conserving";
or ILSAC GF-6B multigrade engine
oil
0W-20 and 5W-30:
API grade SM "Energy-Conserv-
ing", SN "Resource-Conserving",
SN PLUS "Resource-Conserving"
or SP "Resource-Conserving"; or
ILSAC GF-6A multigrade engine oil
Recommended viscosity (SAE):
SAE 0W-16 is filled into your
Toyota vehicle at manufacturing,
and the best choice for good fuel
9-1. Specifications
96 cells
355.2 V
*
)
4.5 L (4.8 qt., 4.0 Imp. qt.)
4.2 L (4.4 qt., 3.7 Imp. qt.)
economy and good starting in cold
weather.
If SAE 0W-16 oil is not available,
SAE 0W-20 oil may be used. How-
ever, it should be replaced with
SAE 0W-16 at the next oil change.
A Temperature range anticipated
before next oil change
B Preferred
Oil viscosity (0W-16 is explained
here as an example):
• The 0W in 0W-16 indicates the
characteristic of the oil which
allows cold startability. Oils with
a lower value before the W allow
for easier starting of the engine
587
9
OwnersManuals2.com