the pullout tool.
4
Check if the fuse is blown.
Replace the blown fuse with a new fuse
of an appropriate amperage rating. The
amperage rating can be found on the
fuse box lid.
Type A
A
Normal fuse
B
Blown fuse
Type B
A
Normal fuse
B
Blown fuse
7-3. Do-it-yourself maintenance
Type C
A
Normal fuse
B
Blown fuse
■
After a fuse is replaced
●
When installing the lid, make sure that
the tab is installed securely.
●
If the lights do not turn on even after
the fuse has been replaced, a bulb
may need replacement. (P.516)
●
If the replaced fuse blows again, have
the vehicle inspected by any autho-
rized Toyota retailer or Toyota autho-
rized repairer, or any reliable repairer.
■
If there is an overload in a circuit
The fuses are designed to blow, protect-
ing the wiring harness from damage.
■
When replacing an electronic com-
ponent, such as a lights, etc.
Toyota recommends that you use genu-
ine Toyota products designed for this
vehicle. Because certain electronic com-
ponents are connected to circuits
designed to prevent overload, non-gen-
uine parts or parts not designed for this
vehicle may be unusable.
515
7
OwnersManuals2.com