Toyota RAV4 PHEV 2023 Owner's Manual page 200

Table of Contents

Advertisement

198
3-1. Instrument cluster
(P.103)
Manually updating the fuel gauge
and possible driving range
The fuel gauge and the possible driving
range are linked. If the displays of the
fuel gauge and possible driving range
do not update after adding a small
amount of fuel, the displays can be
updated by performing the following pro-
cedure.
1
Stop the vehicle on a level surface.
2
Press the "ODO TRIP" switch to
change the odometer and trip meter
display to odometer.
3
Turn the power switch off.
4
While pressing and holding the
"ODO TRIP" switch, turn the power
switch to ON.
5
Continue to hold the "ODO TRIP"
switch for approximately 5 seconds,
and then release it once the odome-
ter begins flashing.
Updating is complete once the odometer
flashes for approximately 5 seconds and
then the display returns to normal.
Outside temperature display
Displays the outside temperature
within the range of -40°C (-40°F) to
60°C (140°F).
When the outside temperature is
approximately 3°C (37°F) or lower,
the indicator
will flash for approxi-
mately 10 seconds, then stay on.
In the following situations, the correct
outside temperature may not be dis-
played, or the display may take longer
than normal to change:
• When stopped, or driving at low
speeds (less than 12 mph [20 km/h])
• When the outside temperature has
changed suddenly (at the
entrance/exit of a garage, tunnel, etc.)
When "--" or "E" is displayed, the sys-
tem may be malfunctioning. Take your
vehicle to your Toyota dealer.
Liquid crystal display
P.211
Free/Open Source Software Infor-
mation
This product contains Free/Open
Source Software (FOSS). The license
information and/or the source code of
such FOSS can be found at the follow-
ing URL.
https://www.denso.com/global/en/
opensource/meter/toyota/
Customization
The gauges and meters can be custom-
ized on
of the multi-information dis-
play. (P.211)
WARNING
The information display at low
temperatures
Allow the interior of the vehicle to
warm up before using the liquid crys-
tal information display. At extremely
low temperatures, the information dis-
play monitor may respond slowly, and
display changes may be delayed.
For example, there is a lag between
the driver's shifting and the new gear
number appearing on the display.
This lag could cause the driver to
downshift again, causing rapid and
excessive engine braking and possi-
bly an accident resulting in death or
injury.
NOTICE
To prevent damage to the engine
and its components
The engine may be overheating if
"Engine Coolant Temp High Stop in a
Safe Place See Owner's Manual" is
shown on the multi-information dis-
play. In this case, immediately stop
the vehicle in a safe place, and check
the engine after it has cooled com-
pletely. (P.578)
OwnersManuals2.com

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents