552
8-2. Steps to take in an emergency
2
Pull out the hose and power
plug from the bottom side of the
compressor.
3
Connect the bottle to the com-
pressor.
Make sure to press the bottle until its
claws are securely engaged to the
compressor and no longer visible.
4
Connect the hose to the bottle.
Make sure to insert the hose until its
claw is securely engaged to the bottle.
5
Remove the valve cap from the
valve of the punctured tire.
6
Extend the hose. Remove the
air release cap from the hose.
You will use the air release cap again.
OwnersManuals2.com