Identification Of Parts And Controls - Sony SVO-5800 Operating Instructions Manual

identification of Parts and Controls | | | | | | | | | | | | | |
8(E)
Identification of Parts and Controls
Indicators
TIME CODE : Lights when time code is
selected in the menu.
DOLBY NR : Lights when Dolby NR is
selected in the menu.
AUDIO LIMITER (SVO-5800/5800P
only): Lights when audio |imiter is
selected in the menu.
S-VHS: Lights while playing a cassette
with S-VHS recording, or when S-VHS
recording is selected in the menu.
HI-Fi: Lights up while playing a cassette
with hi-fi recording or when hi-fi
recording is selected in the menu.
(cassette): Lights when a cassette
is inserted.
REC INHIBIT(SVO-5800/5800P only):
Lights when a cassette without a safety
tab is inserted.
TRACKING: Lights when the CH-2
METER switch is set to TRACKING.
FRAMING: Lights while playing a
cassette with correct framing, or when
framing is selected in the menu.
TBC (Time Base Corrector): Lights
while video signals are output through
the time base corrector.
VITC (VITC time code): Lights when
VITC recording is selected in the menu.
AUTO OFF: Lights if condensation has
developed. The cassette is
automatically ejected when this
indicator is on.
Time counter : Displays the time data
corresponding to the setting of CTL/TC/
U-BIT selector.
Audio level meter: Indicates the
recording level during recording/EE
mode (SVO-5800/5800P only), and
playback level during playback.
q
Menu/time code operation buttons
MENU button
TC PRESET (time code preset) button
Ho (arrow direction) buttons
RESET(NO) button
SET(YES) button
For details on how to use the menultime code operation
buttons, see the section "Changing the Settings of Set-up
Menu" (page S1(E)).
TIME CODE control block
CTUTC/U-BIT (time counter display) selector
LTC/AUTO/VITC (TIME CODE) selector
EXTIINT (time code generator) switch (SVO-5800/5800P only)
For details on how to use the time code control block, see the
section "Time Data" (page 36(E)).
Identification of Parts and Controls
TBC CONTROL (Time Base Corrector control) block
SYNC PHASE (system sync phase) screw
SC PHASE (sub-carrier phase) screw
Y/C DELAY (Y/C delay adjustment) screw
VIDEO (video level adjustment) control
CHROMA (chroma adjustment) control
SET UP (set up adjustment) contro!
HUE (hue adjustment) control
BYPASS/LOCAL/REMOTE (time base corrector) selector
Selects the operation mode of the time base corrector.
BYPASS: Outputs a signal which did not go through the time
base corrector.
LOCAL: Outputs a signal which went through the time base
corrector. Adjust with the controls and screws on the unit.
REMOTE: Outputs a signal which went through the time bae
corrector. Adjust with an external remote control unit.
For details on how to use the TBC CONTROL block, see the
section "Adjustments for Precise Editing — Phase
Adjustments" (page 33(E)).