Sony SVO-5800 Operating Instructions Manual page 43

Changing the Settings of the Unit
— Set-up Menu
The text information and major initial settings to be superimposed by the unit can
be selected with a menu.
This section describes the structure of all the menus, the meaning of each item and
how to change the settings.
Structure of Set-up Menu
The menu screens are arranged in a three-level tree structures, as shown in the
diagram below. The top-level selections (level 1) access the main divisions of the
settings, and the settings themselves are made on levels 2 and 3. The settings are
divided into two groups: the basic settings, to which frequent access is normally
required, and the higher grade extended settings.
The settings of the menu are stored in the non-volatile memory; therefore they are
not erased when the unit is turned off.
© The bold characters in the diragram indicate basic settings, and the normal
characters, extended settings.
© The settings with an asterisk (*) are displayed only on the SVO-5800/5800P;
those with two asterisks (**) only on the SVO-5800/S VP-5600; those with three
asterisks (***) only on the SVP-S600P.
e The figures in parenthesis (_ ) are code numbers displayed on the time counter
display of the front panel of the unit.
Changing the Settings of the Unit — Set-up Menu
Level 1 Level 2 Level 3
OPERATIONAL FUNCTION AUTO EE SELECT* (1001) PB (00)
(1000) LOCAL ENABLE (1002) EE (01)
PREROLL TIME (1003) (The other items on level 3
PLAY START (1004) are omitted in this diagram.)
LTC EDIT COM.* (1005)
CUE-UP SPEED (1006)
DISPLAY CONTROL (2000) CHARA. DISPLAY (2001)
CHARA. POSITION (2002)
CHARA. TYPE (2003)
DISPLAY INFO (2004)
TIME CODE (3000) RUN MODE* (3001)
DF MODE** (3002)
VITC REC MODE® (3003)
UB BINARY GP.* (3004)
PHASE CORR.* (3005)
INT TC MODE* (3006)
EXT TC MODE* (3007)
EXT REGEN TC* (3008)
VITC POSI. 1* (3009)
VITC POSE. 2* (3010)
(continued)
Changing the Settings of the Unit — Set-up Menu 43(E)