Sony SVO-5800 Operating Instructions Manual page 47

Menu items Description
UB REGEN (03) The user bit is synchronized with the data recorded on the tape, and the time code
follows the value preset on the unit or the externally preset values through the 9-pin
REMOTE connector.
| Note | Be sure to set to PRESET(00) when editing.
EXT TC MODE (3007) (SVO-5800/5800P only)
Selects the mode of the internal time code generator when the INT/EXT switch is set
to EXT.
PRESET (00) Records the LTC input through the TIME CODE IN connector.
"| The time code and user bit are synchronized with the time code selected by the EXT
REGEN TC below.
TC REGEN (02) The time code is synchronized with the time code selected by the EXT REGEN TC
below, and the user bit data with the value preset on this unit.
UB REGEN (03) The user bit follows the time code selected by the EXT REGEN TC below, and the
time code data with the value preset on this unit.
EXT REGEN TC (3008) (SVO-5800/5800P only)
Selects the external time code to synchronize the internal time code generator.
Synchronizes with the LTC input through the TIME CODE IN connector.
VITC (01) Synchronizes with the VITC input through the VIDEO IN connector.
VITC POSI.1 (3009) (SVO-5800/5800P only)
Selects the insertion line of the VITC signal between 10 and 21 (SVO-5800) or 7 and
22 (SVO-S800P).
10 LINE (10) - EGEINE (6)]) 21 LINE (21)(SVO-5800)
7 LINE (07) - (79 LINE (19) |- 22 LINE (22)(SVO-5800P)
VITC POSI. 2 (3010) (SVO-5800/5800P only)
Selects the insertion line of the VITC signal between 10 and 21 (SVO-5800) or 7 and
22 (SVO-5800P).
10 LINE (10) - [18 LINE (18)|- 21 LINE (21)(SVO-5800)
7 LINE (07) - [21 LINE (21) ]- 22 LINE (22)(SVO-5800P)
SERVO CONTROL (4000) (SVO-5800/5800P only) Settings relative to servo control
FRAMING (4001) (SVO-5800/5800P only)
Selects whether framing servo is controlled or not.
OFF (00) Framing servo is not controlled. Set to this position when editing tape without frame
control, such as tape recorded with a home VTR.
Framing servo is controlled. Set to this position in ordinary use.
COLOR (02) Color framing servo is controlled.
COLOR FRAMING (4002) (SVP-5600P only)
Selects whether color framing servo for the signal input through REF VIDEO IN is
controlled or not.
OFF (00) Color framing servo is not controlled.
ON (01) Color framing servo is controlled.
SYNC SELECT (4003) (SVO-5800/5800P only)
Selects the reference signal for servo control.
EXT (00) Use the signal input through REF VIDEO IN as a reference.
AUTO (01) Change the reference signal according to the mode of the VTR.
AUTO H PHASE (4004) (SVO-5800/5800P only)
Select the phase of the video signal to be recorded on the tape.
It prevents picture instability of the editing point at the time of interchangeable
editing due to the difference in head changing position.
Set the phase to 6.5H. Set to this position when recording frame by frame, such as in
animation.
Align the phase with that of the tape to be edited. Set to this position in ordinary use.
ON (01)
Changing the Settings of the Unit — Set-up Menu
Changing the Settings of the Unit — Set-up Menu
47(E)