Sony SVO-5800 Operating Instructions Manual page 38
Video cassette recorder/player
Hide thumbs
Also See for SVO-5800:
- Operating instructions manual (67 pages) ,
- Operating instructions manual (67 pages)
Table of Contents
Advertisement
Time Data
Sn
ae Rt
A
ie PT gL
ga
bomen fe he Br
ee ee es a a
2 Use the [4] [1] buttons to select the item, and press the EJ button.
The preset menu of the selected time data appears on the monitor screen.
TC
PRESET
MENU
TCG
PRESET
TCG
00:00:00:00
TC PRESET
MENU
UBG
PRESET
UBG
00:00:00:00
TC PRESET
MENU
CUE-UP
POINT
PRESET
00 :00:00:00
Time
Data
UHIIANNNTEHII
38(E)
Time Data
: DATA
INCREMENT
: DATA
DECREMENT
: LEFT SHIFT
: RIGHT
SHIFT
: DATA
CLEAR
: DATA
{NCREMENT
: DATA
DECREMENT
:
LEFT
SHIFT
: RIGHT
SHIFT
: DATA
INCREMENT
: DATA
DECREMENT
:
LEFT
SHIFT
: RIGHT
SHIFT
: DATA
CLEAR
CUE-UP
START
DATA
SET
SET
:
TC PSET:
ABORT
& EXIT
SET
:
TC PSET:
ABORT
& EXIT
: DATA
SET
: ABORT
& EXIT
E
TC PSET
TCG PRESET (time code
preset) menu
UBG PRESET
(user bit preset) menu
CUE-UP POINT
PRESET menu
3 Use the
buttons to select the digit corresponding to the data to be
changed.
4 Use the ©) CH buttons to input the data.
Note that user bit data values are hexadecimal (digits 0-9 and A-F).
5 Repeat steps 3 and 4 to set all the digits.
To reset the value to 00:00:00:00, press the RESET(NO) button.
6 Press the SET(YES) button.
TCG PRESET or UBG PRESET menu:
A display "NOW SAVING..." appears on the monitor screen, and the data is
saved in the memory of the unit.
Once the setting is saved, the monitor screen and the time counter display
return to normal.
CUE-UP POINT PRESET menu:
Cueing up starts.
e If you turn off the unit while it is in the process of saving the settings, settings
may be lost. Wait until saving is complete before turning the unit off.
e As LTC and VITC use the same generator, you cannot set different values for
each of them.
Setting the run mode of the built-in time code generator
The factory default setting of the RUN MODE item of the TIME CODE menu is
FREE RUN.
The time code generator begins to run from the instant the preset
value is saved. Set it to REC RUN when you want the time code generator to run
during recording (page 46(E)).
Setting the initial value of the time code to the present time
Set the RUN MODE item of the TIME CODE menu to FREE RUN, and set the
initial value of the time code to the present time following the procedures on pages
37(E) and 38(E).
Advertisement
Table of Contents
