Sony SVO-5800 Operating Instructions Manual page 49

Menu items Description
AUDIO CONTROL (6000) Settings relative to audio signal control ;
LINE OUT (6001) Selects the signal to be output from the AUDIO OUT (NORM/Hi-Fi) connector.
HI-FI (00) Outputs the audio signal of hi-fi recording.
Outputs the audio signal of normal audio recording.
HI-Fi REC (6002) (SVO-5800/5800P only)
Determines whether the audio signal is hi-fi recording or not.
OFF (00) Not hi-fi recording
ON (01) Hi-fi recording
HI-Fl REC SEL (6003) (SVO-5800/5800P only)
Selects the audio signal for hi-fi recording.
Records the signal to be input through the AUDIO IN (Hi-Fi) connector.
Records the signal to be input through the AUDIO IN (NORM/Hi-Fi) connector.
Determines whether the Dolby noise reduction circuit is activated for normal audio or
not.
Dolby noise reduction circuit is not activated.
ON (01) Dolby noise reduction circuit is activated.
LIMITER (6005) (SVO-5800/5800P only)
Determines whether the limiter circuit is activated for normal audio or not.
Limiter circuit is not activated.
ON (01) Limiter circuit is activated.
NORMAL CH-2 (6006) Selects the use of channel 2 for normal audio recording.
Used for audio recording.
TIME CODE (01) Used for time code recording.
© In AUDIO position, time code noise is output through the audio output and monitor output of channel 2 of the
norma! audio track if you play back a tape on which time code (LTC) is recorded in channel 2.
e In TIME CODE position, the sound recorded in channel 2 of the normal audio track cannot be output or monitored
if you play back a tape on which the sound is recorded in channel 2.
NORMAL CH-1 REC (6007) (SVO-5800/5800P only)
Selects the audio signal to be recorded on channel | for normal recording.
CH-1 ONLY (00 Records the signal input through CH-1 of the AUDIO IN (NORM/Hi-Fi) connector,
CH-1/CH-2 MIX (01) Records the mixed signals input through CH-1 and CH-2 of the AUDIO IN (NORM/
Hi-Fi) connector.
TAPE PROTECTION (7000) Settings relative to tape protection
STILL TIMER (7001) Selects the time from the playback/record pause mode (pause/freeze picture) to the
mode set by PROTECT MODE.
[5 MIN (00)], 4 MIN (01), 3 MIN (02), 2 MIN (03),
1 MIN (04), 50 SEC (05), 40 SEC (08), 30 SEC (07),
20 SEC (08), 10 SEC (09), 5 SEC (10), 0.5 SEC (11)
PROTECT MODE (7002) Selects the tape protect mode, which shifts after the time set by the STILL TIMER
passes.
oTEP FWD (00) Tape is step-fed in the forward direction at 1/5 speed for about | second.
STOP (01) Enters the stop mode.
TENSION RELEASE (02)
Enters the tension release mode.
HI-FI INPUT (00)
NORMAL INPUT (01)
DOLBY NR (6004)
Changing the Settings of the Unit —- Set-up Menu
Changing the Settings of the Unit — Set-up Menu
49(E)