Sony SVO-5800 Operating Instructions Manual page 56

Changing the Settings of the Unit — Set-up Menu
Changing the Settings of the Unit — Set-up Menu
initializing all the settings
1 Press the MENU button to display the level | settings.
2 Press the RESET(NO) button.
The display below appears on the monitor screen, which is intended to ask the
user to confirm the initialization.
Confirming the initialization
SETUP MENU ri mr <
INITIALIZE ALL !TEMS TO l j l j '
FACTORY PRESET VALUES ?
NO_ KEY : RETURN TO MENU
YES KEY : INITIALIZE
Flashes
3 Press the SET(YES) button.
This returns all the menu settings to their factory defaults. The message "NOW
SAVING..." appears on the monitor screen, the colon ":" on the time counter
display flashes, and the new settings are saved in the memory.
e If you press the RESET(NO) button instead of the SET(YES) button, the
initialization is not carried out, and the display returns to the level 1 menu
screen.
If you turn off the unit while it is in the process of saving the settings, the
initialization cannot be done. Wait until saving is complete before turning the unit
off.
56(E) | Changing the Settings of the Unit — Set-up Menu