Sony SVO-5800 Operating Instructions Manual page 37

2 When TC or U-BIT is selected, use the time code selector to select the time
code (LTC, AUTO, VITC).
When AUTO is selected, VITC is automatically read and displayed for
playback speed within a range of +1/2, and LTC for other speeds.
Resetting the CTL display to "0:00:00:00"
Press the COUNTER RESET button.
When the time data signal output through the MONITOR VIDEO connector is
recorded, the superimposed data may slightly differ from the actual time data.
Setting the Time Code and User Bit Initial Values (SVO-
5800/5800P only), and Cue-up Point")
The SVO-5800/S5800P has a built-in time code generator. Using this built-in time
code generator, you can preset the initial values of the time code and user bit to be
recorded on the tape. In addition, you can preset the time code of the cue-up point
on the SVO-5800/S800P and SVP-5600/S600P. If the time code of the cue-up point
is set, the desired scene can be quickly located.
Time Data
Setting the time code and user bit initial values, and cue-up point
1 Press the TC PRESET button.
The time code preset menu appears on the monitor screen.
TC PRESET MENU
TO) PRESET +
UGB PRESET
CUE-UP POINT PRESET
Time code preset menu
(continued)
1) Cue-up: To locate the desired point and pause.
Time Data | 37(E)