Sony SVO-5800 Operating Instructions Manual page 55

5 press the &! button.
The level 3 settings appear as a lower level of PROTECT MODE.
Displaying setting conditions
SETUP MENU
TAPE PROTECTION
PROTECT MODE STEP
« OSTEO FY
STOP
TENSION RELEASE
Flashes
6 Press the (2) button to select "STOP."
Selecting the setting to be changed
SETUP MENU
TAPE PROTECTION
PROTECT MODE 'STEP
* Sua FWD
ore
TENSION RELEASE
€
e Press the RESET(NO) button to initialize this setting (return to the factory
default setting).
7 Press the (4 button to return to the upper level when changing other settings,
and repeat steps 2 to 6.
8 Press the SET(YES) button.
The display "NOW SAVING..." appears on the monitor screen, the colon
on the time counter display flashes, and the new setting is saved in the memory.
Once the saving operation is complete, both the monitor screen and time
counter display return to the normal state.
"oy
e If you turn off the unit while it is in the process of saving the settings, the settings
may be lost. Wait until saving is complete before turning the unit off.
¢ If you press the MENU button without pressing the SET(YES) button, the new
settings are not saved. "ABORT!" is displayed for 0.5 seconds and the menu is
forcibly exited. Be sure to press the SET(YES) button after changing the
settings.
Changing the Settings of the Unit — Set-up Menu
Changing the Settings of the Unit — Set-up Menu SS5(E)