Sony SVO-5800 Operating Instructions Manual page 51

Changing the Settings of Set-up Menu
Although the menu settings are divided into basic and extended settings, the
method of the settings is the same.
Buttons used to change the settings
This operation uses the following buttons on the front panel.
RESET(NO)
SET(YES)
¢ Opens the menu and enters the menu mode.
e Closes the menu and quits the menu mode.
Move the reverse video cursor up and down to change the
settings and conditions within a level. If this button is held down,
the reverse video cursor continues to move.
e The &) button moves to the menu at the next lower level.
¢ The button moves to the menu at the next higher level.
fH © buttons
If either button is held down, the reverse video cursor continues
fj &! buttons
to move.
SET(YES) button ¢ Stores the changed settings in the memory.
e Answers "YES" to a question on the monitor screen.
RESET(NO) button e Initializes the settings (return to the factory default settings).
e Answers "NO" to a question on the monitor screen.
e If you turn off the unit after changing the settings while it is in the process of
saving the settings, the settings may be lost. Wait until saving is complete before
turning the unit off.
e lf you press the MENU button without pressing the SET(YES) button, the new
settings will not be stored. "ABORT!" is displayed on the monitor screen for 0.5
seconds and the menu is forced to finish. Be sure to press the SET(YES) button
after changing the settings.
Changing the Settings of the Unit — Set-up Menu
Changing the Settings of the Unit — Set-up Menu AAAIUIK
51(E)