Sony SVO-5800 Operating Instructions Manual page 42

rine oa IIIIHIIH
42(E)
Time Data
3 Set the TIME CODE menu items as follows (pages 46(E) and 47(E)):
RUN CODE Automatically set to FREE RUN.
DF MODE Automatically set to the same mode as that of the input time
code (drop-frame mode or non-drop-frame mode).
VITC REC MODE Set to OFF when recording VITC inserted in the external video
signal without synchronization.
Set to ON when recording VITC while synchronizing the internal
EXT TC MODE
without synchronizing the internal time code generator with the
external time code.
EXT REGEN TC Select the time code (LTC or VITC) trom the external generator.
time code generator.
vITC POSI. 1 Select the insertion line of the VITC signal.
VITC POSI. 2
Set whether to record the external time code input with or
4 Set the following menus according to the time data to be recorded.
© Set the NORMAL CH-2 item of the AUDIO CONTROL menu to TIME
CODE for recording LTC (page 49(E)).
e Set the BLANING item of the VIDEO CONTROL menu as follows (page
48(E)):
ON
for recording VITC synchronized with the internal time code
(factory default
generator. In this position, VITC inserted in the input video
setting) signal is erased.
[OFF for recording VITC inserted in the input video signal.
The above is the procedure for recording the time code output from the external
time code generator.
Synchronizing the internal time code generator with the external time
data
Once it is synchronized, the internal time code generator keeps on running even if
the extemal generator is disconnected.
Time Data