Sources - NewLine Q Series User Manual

4.2 Sources

Tap
HDMI 2, and HDMI 3, OPS, SDM and Display port.
The icon without signal source connected is gray, and the icon with signal source connected is
white. After you choose white icon, the content of the signal source can be displayed on the
screen.
On the signal source page, tap OPS to enter the OPS source, as shown in the following figure.
If the display is not equipped with an OPS, "No Signal" is displayed.
Icons Functions
Return to the account selection interface.
to enter the signal source selection, including (F) Type C, (R) Type C, HDMI 1,
38