Installing The Ops (Optional); Installing The Wi-Fi Module - NewLine Q Series User Manual

2.4 Installing the OPS (Optional)

The OPS does not support hot plugging. Therefore, you must insert or remove the OPS when
the display is powered off. Otherwise, the display or OPS may be damaged.
You will need to purchase the OPS separately. Perform the following steps to install the OPS.
Step 1 Unscrew the M4 screws by hand to remove the OPS protective cover.
Step 2 Push the OPS into the OPS port on the rear of the panel until firmly seated, using the M4
screws to secure the OPS.

2.5 Installing the Wi-Fi Module

Wi-Fi Module does not support hot plugging. Therefore, you must insert or remove the Wi-Fi
Module when the display is powered off. Otherwise, the display or Wi-Fi Module may be
damaged.
Perform the following steps to install the Wi-Fi Module.
Step 1 Unscrew the 2 screws on the Wi-Fi Module port and remove the shielding cover.
21