Installing The Sdm-S (Not Included) - NewLine Q Series User Manual

2.7 Installing the SDM-S (Not included)

The SDM-S does not support hot plugging. Therefore, you must insert or remove the SDM-S
when the display is powered off. Otherwise, the display or SDM-S may be damaged.
Currently we don't provide SDM-S, but if you have a SDM-S to use, please install referring to
the following steps.
Step 1 Unscrew the 2 screws on the SDM-S slot and remove the shielding cover.
Step 2 Insert the SDM-S into the port on the rear of the panel until firmly seated, using the 2 screws
to secure it.
23