Calibration - NewLine Q Series User Manual

Step 3 Tap OK to turn off the display, and the power indicator will turn to red.
Step 4 If you want to completely turn off the product, turn off the rocker switch behind the panel

3.3 Calibration

If the cursor position has a big deviation from the actual touch point, calibration is used to
eliminate the deviation. Calibration is required in the following scenarios:
⚫
⚫
If the positioning is not correct, perform the following operations to calibrate again. The
following takes Windows 10 as an example:
Step 1 Ensure that the HDMI or DP interface and external products are connected properly.
Step 2 Select the corresponding Windows signal from the signal source menu. The Windows page
will be displayed.
Step 3 Select Tablet PC Settings on the Control Panel page.
(next to the power socket) and unplug the power cord.
If an OPS is installed, the OPS and the screen will simultaneously powered off when the power is
⚫
shutoff.
Please properly shut down the panel before disconnecting the power source or it may cause damage.
⚫
Accidental power failure may cause damage to the panel.
Do not repeatedly turn the power on & off in a short period of time as it may cause malfunction.
⚫
The OPS is used.
A computer is connected through the HDMI or Display Port interface.
Interface operation on the embedded operating system does not need positioning. External products with
Microsoft Windows 7 or later versions will require positioning.
27