System - NewLine Q Series User Manual





Using Low Blue Light
Decreasing the blue light emitting by the Interactive Flat panel display reduces the blue light
exposure to your eyes.
The Interactive Flat panel display use a low blue light panel default setting mode, that when
used in the default setting mode, is certified by TUV to reduce blue light output and create a
more relaxing and less stimulating image while reading content on the screen.
The hardware solution was developed to control the blue light range emission. Instead of
reducing the total blue range, the selected range reduction does not impact CCT and display
color. It exposes users to less blue light emission while letting them enjoy good color on the
display.
Flicker Free
The flicker phenomenon is that the screen continues to alternate between light and dark, that
is, the screen is constantly flickering. Some flicker phenomenon may not be perceived by the
human eye, but the eye will still respond to the flicker of the screen (iris will expand and
contract according to changes in brightness).
To improve this phenomenon, we use DC dimming technology to improve it, and obtained the
flicker free certification.

4.9.17 System

Enter the System submenu to set the languages, gestures, date and time, system updates,
multiple users and reset options.
Let your eyes rest for 10 minutes after 2 hours of continues use.
Roll your eyes upward towards your eyebrows, and then roll your eyes in a large circle
every few hours.
For every 20 minutes of display viewing, look into the distance for 20 seconds.
When your eyes get sore, close your eyes for a minute.
76