OPS
On the Home Page, tap OPS to enter the OPS source, as shown in the following figure. If the display is not
equipped with an OPS, "No Signal" is displayed.
Sources
On the Home page, tap
Display port, OPS and SDM.
The icon without signal source connected is gray, and the icon with signal source connected is white. After you
choose white icon, the content of the signal source can be displayed in the preview window for real-time preview.
You can enter sources interface by the following methods:
Tap the
Tap the
Tap the
to enter the signal source selection, including HDMI 1, HDMI 2, HDMI 3, Type C,
icon on the home page;
icon on the quick settings;
icon on the remote control.
33