4.9.13 Tool Bar
Enter the Tool Bar submenu to set whether to display the tool bar.
⚫
⚫
4.9.14 Input and Output
Enter the Input and Output submenu to set the Starting source , enable new input source and
App auto-launch.
⚫
⚫
⚫
Left: Tap to turn on/off the left tool bar.
Right: Tap to turn on/off the right tool bar.
Starting Source: Customize settings to connect to the signal source after power on.
New input Source: After the New input Source function is enabled, the system can
automatically switch to the screen of the newly connected signal source.
Source preview: Tap to turn on/off the source preview.
72