Ports - NewLine Q Series User Manual

1.3 Ports





The rear power output port is supplies 180W (maximum) power. Please contact Newline to
purchase the power AC adapter for powering external devices. Please do not connect any
products which require power than listed. Doing so may cause injury or damage to the panel.
Front USB ports and rear USB 3.0/USB 2.0 ports switch connections based on signal
sources. If the current signal source is reading the data from an external product
connecting to the port, please switch the signal source after the data reading is complete.
Otherwise, the data or product may be damaged.
For USB use, USB 2.0 provides up to 500mA whereas USB 3.0 provides up to 900mA of
power. Please make sure the USB flash drive is formatted to FAT32 before inserting into
the panel.
Please use the supplied cable in the accessory box or the HDMI association certified
shielded cable to better ensure the signal quality.
While HDMI and Display Port offer support for cables of varying lengths, the maximum
cable length that Newline recommends for optimal performance is 3 meters (10 feet) for
HDMI and 1.8 meters (around 6 feet) for Display Port. Using cable longer than
recommended length may cause data loss and a negative impact to display quality.
12