Network And Internet; Connected Devices - NewLine Q Series User Manual

4.9.1 Network and Internet

Enter the Network submenu to enable Wi-Fi or Ethernet, view network information, and
enable the Wake on LAN function.
⚫
⚫
⚫
⚫
⚫
⚫

4.9.2 Connected devices

Enter the Connected devices submenu to turn on Bluetooth, system will automatically detect
and connect to new device via Bluetooth.
Internet: Tap the corresponding button to enable the Wi-Fi function, set the network
preferences about turn on Wi-Fi automatically and Notify for public networks.
Ethernet: When the RJ45 port is properly connected to the network cable, tap the
corresponding button to enable the Ethernet function. User can View the MAC address,
IP address, gateway, subnet mask, and DNS information. The user can customize settings
to automatically obtain an IP address of the LAN or set a static IP address as needed.
Network wake up: Tap the corresponding button to enable the function.
LAN control: Tap the corresponding button to enable the function.
Aeroplane mode: Tap the corresponding button to enable the function.
Hotspot & tethering: The user can customize relevant settings for portable Wi-Fi
hotspot.
66