Installing The Internal Pc (Optional) - NewLine TRUTOUCH VN series User Manual

Installing the Internal PC (Optional)

CAUTION
The internal PC does not support hot plugging. Therefore, you must insert or remove it when the
display is powered off. Otherwise, the display or internal PC may be damaged.
The internal PC is not configured by default. You will need to purchase the internal PC
separately. Perform the following steps to install the internal PC.
Step 1: Unscrew the M3 screws by
hand to remove the internal PC
shielding cover.
Step 3: Secure the internal PC to the
display by using the M3 screws.
Step 2: Push the internal PC into the
internal PC port at the rear of
the display from right to left.
Step 4: Ensure the installation is
correct before turning the
power on again.
M3
M3
14