CAUTION:
The control box can be placed on the floor or in your working cell. Note that 5 cm clearance
should be left at both sides for ventilation.
Use the M4L6 screw to secure the ground wire with the control box as shown below.
4.2.3.1 Robot Stick
The Robot Stick has 6 function buttons, 3 indicator lights, 1 Emergency Switch, 1 set of speed indicator,
and 1 QR-code. Their functions are as follow:
Emergency Switch
CAUTION:
When operating the robot stick, do not use other objects than fingers to press the robot stick.
Items
Emergency Switch
Power Button
M/A Mode Switch
Button
Play/Pause Button
Stop Button
Medium & Heavy Payload Series-Hardware Installation Manual TM12/14 Series Hardware Version: 3.2
Figure 29: Securing the ground wire with control box
Power Button
Power Indicator
Stop Button
Figure 30: Robot Stick
Default emergency button for the robot
Power initiation (single press)/ Shutdown (long press)
Toggle Manual/Auto Mode (single press). See Safety Manual for details.
Play/Pause Project (single press)
Press this button to stop any project.
Mode Indicator Lights
Speed Indicator
Basic Function
M/A Mode Switch Button
+ Button
QR Code Label
- Button
Play/Pause Button
40