Omron Techman Robot TM12 Series Hardware Installation Manual page 72

Calibration Plates
(One large calibration plate and one small
calibration plate. Peel the protective wrap off before
using.) *The Calibration Plate comes only with TM
Robots fitted with the hand-eye camera.
IO cables
(One 8-pin digital I/O cable and one 5-pin analog
I/O cable)
Cable Length: 100 cm
Landmark
(Two Landmarks. Peel the protective wrap off
before using.)
*The Landmark comes only with TM robots fitted
with the hand-eye camera.
Landmark size: 50.5 * 50.5 ㎜ (tolerance ± 0.1 ㎜)
Power cord of the control box
(TM12 / TM14 / TM12X / TM14X)
(3 cable, Type B, G, F)
Cable Length: 180 cm
Power cable of the control box
(TM12M / TM14M)
(1 cable)
Cable Length: 120 cm
72
Medium & Heavy Payload Series-Hardware Installation Manual TM12/14 Series Hardware Version: 3.2