Level Service Manual
Removing and Replacing the Main PCBA Assembly
5.
Insert the LCM FPC into the connector of keypad PCBA and lock the connector switch.
Figure 30. Assembly the LCM FPC
6.
Place Mylar on the connector to fix the FPC by tweezers.
Figure 31. Place mylar on the connector.
7.
Replace the Keypad PCBA, Upper module and Lower module, Battery, and Battery Door
assembly as described in the procedures.
1.
Remove the battery door, battery, Upper module and Lower module as described in the
procedures.
July 03, 2008
Disassembly
31