Disassembly
Removing and Replacing the Transceiver Board Assembly
G
G
26
This product contains static-sensitive devices. Use anti-static handling procedures
to prevent electrostatic discharge (ESD) and component damage.
1.
Remove the battery cover, battery, SIM, antenna, and rear housing as
described in the procedures
The flexible printed cable (FPC) (flex) is easily damaged. Exercise extreme care when
handling.
2.
Carefully work the flat end of the disassembly tool under the flex connector
and remove the connector from the transceiver board. See Figure 7.
Figure 7. Disconnecting the flex from the transceiver board
November 16, 2004
.
Display Flex Connector
Transceiver PCB Assembly
V635
041177o
6809490A75-O