Level Service Manual
Removing and Replacing the Camera Module
5.
Align the hooks of Antenna carrier to the Main PCBA hole which indicate in the figure 44
to assembly.
Figure 44. Removing the Speaker
6.
Replace the Main PCBA, Upper module and Lower Module, Battery and Battery door as
described in the procedures.
1.
Remove the battery door, battery, Upper module and Lower module, and Main PCBA as
described in the procedures.
2.
Remove the Camera Shielding cover.
Figure 45. Removing the Antenna Carrier
July 03, 2008
Disassembly
37