Replacing A Paired Device; Paired Devices; Aking A Home Call Using Your Landline; Aking A Cellular Call Using Your Cordless Dect Handset - Motorola S701BT User Manual

Doc Title : User's Guide
Model : Motorola S70×BT
․
If you would like to pair up another Bluetooth device, please repeat the steps as above.

3.2.2 Replacing a paired device

If you have already paired up two Bluetooth enabled mobile devices, you will need to replace one of them if you
would like to pair up another device. Follow the steps below to replace and pair up a new device.
․
Press <MENU> and then <VOL+> or <REDIAL/VOL-> to select BLUTOOTH.
․
Press <MENU> and then <VOL+> or <REDIAL/VOL-> to select SETUP CELLULAR.
․
Display will show the two cellular names of the paired devices.
․
Press <VOL+> or <REDIAL/VOL-> to select the cellular device you would like to replace.
․
Press <MENU> to confirm. Display will show REPLACE THE CELLULAR?
․
Press <MENU> to confirm. Display will show CELLULAR READY?
․
Refer to section 3.2.1 to proceed with the next steps.
NOTE
When pairing a new cellular, the connected cellular will be disabled temporarily.

3.2.3 Paired devices

The cellular(s) paired up will be displayed in the paired devices list, no matter whether it(they) is(are) connected or
not. You can choose to connect, or remove the cellular from this menu.
1. Press <MENU> and then <VOL+> or <REDIAL/VOL-> to select BLUETOOTH.
2. Press <MENU> and then <VOL+> or <REDIAL/VOL-> to select PAIRED LIST.
3. Press <MENU> and then display will show the Cellular name(s) of paired device(s).
NOTE
Display will show NO PAIRED DEVICE if there is no device paired up.
4. Press <VOL+> or <REDIAL/VOL-> to select the desired cellular device.
For the connected cellular device:
5. Press <MENU> to remove the cellular device. Display will show REMOVE THE CELLULAR?
6. Press <MENU> to confirm.
For the cellular device that is not connected:
5. Press <MENU> and then <VOL+> or <REDIAL/VOL-> to select CONNECT or REMOVE CELLULAR.
6. Press <MENU> to confirm. If you select REMOVE CELLULAR, press <MENU> again to confirm.
NOTE
․
When the connected cellular is removed, the corresponding <device #1 icon> or <#2 icon> will be off.
․
When the disconnected cellular is connected, the corresponding <device #1 icon> or <#2 icon> will be on.
․
When the cellular is removed, the device name will be removed and EMPTY will be displayed instead in the
paired devices list.
3.3 Making a home call using your landline
1. Enter the phone number and press <HOME> or <SPEAKER> to dial the phone number.
3.4 Making a cellular call using your cordless DECT handset
If there is only one Bluetooth enabled mobile phone paired up and connected,
1. Enter the phone number, and then press <CELLULAR> to dial out.
If there are two Bluetooth enabled mobile phones paired up and connected,
1. Enter the phone number, press <CELLULAR> and then <VOL+> or <REDIAL/VOL-> to select the desired
cellular device.
2. Press <MENU> or <CELLULAR> to dial out.
NOTE
If the cellular device is paired up but not connected, you should connect the cellular device before making an
external cellular call.
This document contains confidential and proprietary information of VTech Telecommunications Ltd
Revision :
Page(s) :
1.0
15 of 29