Alert Settings; Battery Function; Operation - Motorola ZN 200 Service Manual

General Operation

Alert Settings

Battery Function

Operation

16
In addition to 35 preset ring tones, ZN200 telephones allow the user to download 5 additional
ring tones via GPRS/USB. (Availability is carrier and Network dependant). Motorola ZN200
phones incorporate the VibraCall
when a ringing phone is unacceptable. Alerts can be set to ring only, vibrate only, vibrate then
ring, or no ring or vibrate. Additionally, the profiling feature allows users to identify incoming
calls by a specific ringer tone.
Battery Charge Indicator
The telephone displays a battery charge indicator icon in the idle screen to indicate the battery
charge level. The gauge shows four levels: 100%, 66%, 33%, and Low Battery.
Battery Removal
Removing the battery causes the phone to shut down immediately and loose any pending work
(partially entered phonebook entries or outgoing messages, for example).
All batteries can cause property damage and/or bodily injury such as burns if a conductive
material such as jewelry, keys, or beaded chains touch exposed terminals. The conductive
material may complete an electrical circuit (short circuit) and become quite hot. Exercise care
in handling any charged battery, particularly when placing it inside a pocket, purse, or other
container with metal objects.
If the battery is removed while receiving a message, the message is lost.
To ensure proper memory retention, turn the phone OFF before removing the battery. Imme-
diately replace the old battery with a fresh battery.
For detailed operating instructions, refer to the appropriate User Guide listed in the Related
Publications section toward the end of this manual.
®
discreet vibrating alert that helps to avoid disturbing others
July 03, 2008