Removing And Replacing The Transceiver Board Assembly - Motorola V3 RAZR 05 Service Manual

Disassembly

Removing and Replacing the Transceiver Board Assembly

G
28
This product contains static-sensitive devices. Use anti-static handling procedures
to prevent electrostatic discharge (ESD) and component damage.
1. Remove the battery cover, battery, SIM, antenna, rear housing and battery
tray as described in the procedures
2. Lift the transceiver board assembly out of the front housing with the metal
tweezers. See Figure 9.
Tweezers
Figure 9. Removing the Transceiver PC board Assembly
3. To replace, insert the transceiver board assembly into the rear housing.
4. Carefully and gently press the transceiver board into position and until it snaps
into place.
5. Replace the antenna assembly, rear housing, SIM, battery, and battery cover
as described in the procedures.
November 09, 2005
.
Transceiver PC Board
Assembly
V3 RAZR 05
040713o
6809500A08-O