Removing And Replacing The Lcm Module And Receiver Assembly - Motorola ZN 200 Service Manual

Level Service Manual
Removing and Replacing LCM Module and Receiver Assembly
10. Stick mylar to fix FPC and connector.
Figure 26. Remove the LCM module
11. Replace the Upper Module and Lower Module, battery, and battery door assembly as
described in the procedures.
1. Remove the battery door, battery, Upper module and Lower module, and Keypad PCBA
assembly as described in the procedures.
2. Unlock te connector of the reciver and take off the LCM module by tweezers
Figure 27. Remove the LCM module
July 03, 2008
Disassembly
.
29