Table of Contents
Advertisement
INFORMATION ABOUT MAINTENANCE
5.4
KDI Mechanical Injection Tier 3 – Stage IIIA
KDI Mechanical Injection Uncertified Engines
(1) - In case of low use: 12 months.
(2) - The period of time that must elapse before checking the filter element depends on the environment in which the
engine operates. The air filter must be cleaned and replaced more frequently under very dusty conditions.
(3) - In case of low use: 36 months.
(6) - Contact authorized KOHLER workshops.
(7) - The replacement interval is only an indication, it strongly depends from environmental condition and hose status
detected during regular visual inspection.
(8) - The first check must be done after 10 hours.
(9) - Test the coolant condition annually with coolant test strips.
(10) - It is recommended to have SCA (Supplemental Coolant Additives) added at the first maintenance interval.
(11) - Read Cap. 2.5,
"KDI Mechanical Injection Uncertified Engines (no EGR Engines)"
5.3 Oil level check
Important
• Before proceeding with operation, read
• Do not use the engine with the oil level below the minimum.
1. Remove the oil dipstick B and check that the level is up to
MAX.
2. Pour in recommended oil until reaching the MAX level mark.
3. Reinstall the oil dipstick B completely..
4. Re-tighten the cap A (Fig. 5.2).
Internal Communication: For internal & partner use only.
FUEL FILTER AND PREFILTER CARTRIDGE REPLACEMENT
ENGINE VERSION
(1)
(1)
Par. 3.2.2
PERIOD (HOURS)
250
.
Fig. 5.1
Fig. 5.2
5
PAR.
500
6.3
31
EN
Advertisement
Table of Contents
