Table of Contents
Advertisement
INFORMATION ABOUT MAINTENANCE
5.6 Rubber hoses check
Danger
• For safety precautions see
The check is carried out by exerting a slight deflection or bending along
the pipe and near the hose clamps. Components must be replaced if
they have clear signs of cracks, tears, cuts, leaks and do not retain a
certain degree of elasticity.
Important
• Before proceeding with operation, read
•
If hoses are damaged contact an authorized KOHLER
workshop.
1.
Check that the:
•
Fuel system hoses A are intact.
•
Cooling circuit hoses B.
•
Vent system pipes C.
•
Air system ducts D.
5.7 Check coolant level
Important
• Before proceeding with operation, read
Danger
• For safety precautions see
NOTE: Before proceeding with any operation on the engine, stop it
and allow it to cool.
Warning
• Presence of steam pressurized coolant danger of burn.
NOTE: Component not necessarily supplied by KOHLER.
1. Start the engine without the radiator cap A.
2. Top liquid up until the pipes inside the radiator are covered by
about 5 mm.
3. Top up if necessary.
4. Do not overfill the radiator, but leave room for the coolant to
expand.
5. Reinstall radiator cap A
Internal Communication: For internal & partner use only.
Chap.
3.
Par.
3.2.2.
Par.
3.2.2.
Chap.
3.
Fig 5.5
Fig 5.6
Fig 5.7
5
33
EN
Advertisement
Table of Contents
