Oil Filter Cartridge Replacement - Kohler KDI 3404 TCR Owner's Manual

6
9. Fit and remove the oil dipstick B to check the level.
Pour in fluid until reaching the MAX level mark.
10. Upon completion, reinstall the oil dipstick B completely.
11. Tighten the cap A.

Oil filter cartridge replacement

•
6.2 Oil filter cartridge replacement
• Electric/pneumatic screwdrivers are forbidden.
1. Unscrew cartridge holder cover A by performing three
complete turns and wait 1 minute.
NOTE: This operation allows to oil contained in
the support F to flow into the oil sump in
the correct way.
2. Unscrew cartridge holder cover A and check that the oil
in the lub. oil filter support F has flowed towards the oil
sump.
3. Remove the cap A as well as the oil cartridge B from the
oil filter support.
4. Remove and replace the oil cartridge B with a new one.
Remove and replace the gaskets C, D and E with new
ones.
EN
30
INFORMATION ABOUT REPLACEMENTS
In case of low use replace it 12 months.
•
For disposal of oil filter cartridge and fuel filter refer to
•
Par. 6.5 DISPOSAL and SCRAPPING.
Important
6.4
Warning
(Par. 6.2) and fuel filter replacement
A
6.5
B
6.6
B
MAX
MIN
(Par. 6.3)
A
F
D
C
ED0053030050
B
B
E
_07
Index