Information And Safety Signals - Kohler KDI 3404TM Operation And Maintenance Manual

Hide thumbs Also See for KDI 3404TM:
Table of Contents

Advertisement

3

3.4 Information and safety signals

Before working on the engine or equipment,
disconnect the battery negative (-) wire.
Engine components can get extremely hot from
operation. Do not touch engine while operating or
just after stopping.
Never operate the engine with heat shields or
guards removed.
Stay away while engine is in operation. Keep
hands, feet, hair, and clothing away from all
moving parts to prevent injury.
Never operate the engine with covers, shrouds, or
guards removed.
LETHAL EXHAUST GASES
EN
22
SAFETY INFORMATION
ACCIDENTAL START
Accidental Starts can cause
severe injury or death.
HOT PARTS
Hot Parts can cause severe
burns.
ROTATING PARTS
Rotating Parts can cause
severe injury.
Carbon Monoxide can cause
severe nausea, fainting or
death.
HIGH PRESSURE FLUID RISK OF PUNCTURE
High Pressure Fluids can puncture
skin and cause severe injury or death.
Do not work on fuel system without proper training or
safety equipment. Fluid puncture injuries are highly
toxic and hazardous.
If an injury occurs, seek immediate medical
attention.
EXPLOSIVE FUEL
Explosive fuel can cause fires and
severe burns.
Fuel is flammable and its vapours can ignite. Store
fuel only in approved containers, in well ventilated,
unoccupied buildings. Do not fill the fuel tank while
the engine is hot or running, since spilled fuel could
ignite if it comes in contact with hot parts or sparks
from ignition.
Do not start the engine near spilled fuel.
Never use fuel as a cleaning agent.
EXPLOSIVE GAS
Explosive Gas can cause fires and
severe acid burns.
Charge battery only in a well ventilated area. Keep
sparks, open flames, and other sources of ignition
away from the battery at all times. Batteries produce
explosive hydrogen gas while being charged.
Keep batteries out of the reach of children.
Remove all jewelry when servicing batteries. Before
disconnecting the negative (-) ground cable, make
sure all switches are OFF.

Advertisement

Table of Contents
loading

Table of Contents