Codeplug Repair Procedure - Motorola iDEN i530 Field Service Manual

Refer to the Radio Service Software User's Guide for more information on setting up your test
computer as an RSS workstation.
NOTE: For faster codeplug reading, enable the QuickComm feature in the RSS configuration
setup.
6.5.1

Codeplug Repair Procedure

If the codeplug is corrupted, the unit displays a SELF CHECK ERROR 0800 message. The
procedure for repairing a corrupted codeplug is described in the RSS online Help System.
Equipment Required: Computer workstation with RSS installed, data cable RS232 or USB,
To access the codeplug Help topic in Windows:
1. Set up your test equipment configuration. See Figure 6-1 for an illustration of this configuration.
2. Start the RSS program.
3. Click on the Help choice on the menu bar, and then select Contents. The RSS online Help is
displayed.
4. Click on the Troubleshooting link, and follow the detailed directions.
68P80400P65-O
BASIC LEVEL TEST MODES AND PROCEDURES: Connecting the Unit to the RSS Workstation
Unit Under
Test
RS232 Data Cable or
USB Data Cable
Figure 6-1. Data Cable Programming Setup
reference unit (must be the same model as the problem unit).
Computer
Workstation
(RSS)
RS232 Port/
USB Port
6-9