Table of Contents
Advertisement
Force Quitting Smart Control Mode
Press and hold the buttons
corner of the LED will illuminate.
•
After quitting the smart control mode, the alarm will not sound when the door is open for more
than 5 minutes.
NOTE: The interior light can only be controlled by pressing the button
•
Press and hold the buttons
mode.
ECO Mode
•
Press and hold the
•
In this mode, the interior LED light, the compressor indicator
the display panel will be turned off and the ° will illuminate on the upper left corner of °C / °F.
Demo Mode
• Press and hold buttons
mode.
• In this mode, the display panel can operate settings, but the temperature is fixed display 54°F
(12°C), and all fans and the compressor will not start.
LOCK
Press and hold
for 3 seconds to lock or unlock the control panel. The
when the control panel is locked.
Sabbath Mode
•
Press and hold buttons
Sabbath mode. In this mode, LED will display "Sb". This mode turns off the displays, and the
interior light and prevents them from turning on again. Normal cooling operations will still take
place. The compressor and the fan work normally.
•
When the cabinet powers off, it will not automatically exit Sabbath mode, and it will keep
Sabbath mode when it powers on again. The Sabbath Mode will automatically turn off after 96
hours.
and
simultaneously for 5 seconds, the small dot in the upper left
and
simultaneously for 5 seconds to re-enter the Smart control
button for 3 seconds, it can enter or exit ECO mode.
,
and
simultaneously for 10 seconds, it can enter or exit demo
and
at the same time for at least 5 seconds to enter or exit
and the temperature value on
11
.
indicator will illuminate
Advertisement
Table of Contents
