Search And Add Wi-Fi; Bluetooth; Turning Bluetooth On Or Off; Pairing Gac2500 With A Bluetooth Device - Grandstream Networks GAC2500 User Manual

Search and Add Wi-Fi

Once Wi-Fi is turned on, GAC2500 will automatically start the scanning within the range. A list of Wi-Fi
networks will be displayed as scanning result. Tap on the SSID and enter the correct password information
to connect to the selected Wi-Fi network.
Follow the steps below for static IP usage in Wi-Fi environment:
1. Tap on one Wi-Fi network in the scanned Wi-Fi list to bring up the dialog that shows signal strength,
security, password and option "Show advanced options".
2. Select "Show advanced options". The dialog will show additional option "IP settings".
3. In "IP settings", select Static IP, enter IP Address, Subnet Mask, and Default Gateway for the GAC2500
to correctly connect to the network.

Bluetooth

Users could use the Bluetooth to send or receive files to cellphone, or use Bluetooth speaker and etc.

Turning Bluetooth On or Off

There are two ways to enable Bluetooth:
•
On the LCD display device, go to Settings->Network->Bluetooth.
•
Click to enable the Bluetooth in the drop-down status bar.

Pairing GAC2500 with a Bluetooth Device

Before connecting GAC2500 with other Bluetooth device, users must pair them first. They will stay paired
afterwards unless they are manually unpaired. To pair Bluetooth device:
On the LCD display device, go to Settings->Bluetooth. Switch the "Bluetooth" option.
1.
Select "Bluetooth settings", drag up from LCD bottom and press
2.
select "Search for devices".
Dit document wordt u aangeboden door TelecomHunter.
Dé zakelijke Telecom webshop.
T 088 7463 444 | @ sales@TelecomHunter.nl | www.TelecomHunter.nl

Figure 22: GAC2500 Add Wi-Fi Screen

GAC2500 User Guide
button on the remote control and
P a g e | 37