Figure 23 Gac2500 Bluetooth - Paired Device; Connecting To A Bluetooth Device - Grandstream Networks GAC2500 User Manual

PAIRING GAC2500 WITH A BLUETOOTH DEVICE
Before connecting GAC2500 with other Bluetooth device, users must pair them first. They will stay paired
afterwards unless they are manually unpaired. To pair Bluetooth device:
1. On the LCD display device, go to Settings->Network->Bluetooth.
2. Press button on the remote control and select "Search for devices".
3. The GAC2500 scans and displays the IDs of all available Bluetooth devices in range. Once the
Bluetooth device shows up in the result, tap on it to start pairing.
4. Confirm the passkey in the prompted message (if any). Or if passcode is required, please refer to the
device's documentation or other procedures to obtain the passcode.

CONNECTING TO A BLUETOOTH DEVICE

After successfully paired, the device will be connected to the GAC2500 immediately. Users will see this
device listed under "Paired Devices". Tap on
"Rename", "Unpair" and etc.
If the connection is lost between the Bluetooth device and GAC2500, go to LCD menu->Settings-
>Network->Bluetooth and click on the device name under "Paired devices" again to reconnect.
Firmware Version 1.0.1.x
next to the connected device. Users will see options

Figure 23 GAC2500 Bluetooth - Paired Device

GVC2500 User Guide Page 34 of 88