Paging/Intercom; Answering A Call; Figure 27 Gac2500 Single Incoming Call Screen - Grandstream Networks GAC2500 User Manual

http://arttel.ru
1. Access the dial screen on GAC2500;
2. Set the mode to "IP Call";
3. Input the target IP address. For example, if the target IP address is 192.168.124.123 and the port is
5062, input the following:
192*168*124*123#5062
The * key represents the dot (.) and the # key represents the colon (:).
4. Press

PAGING/INTERCOM

Before placing paging/intercom, please make sure the callee has paging/intercom enabled so it can
automatically answer the paging/intercom call. To make paging/intercom call:
1. Access the dial screen on GAC2500;
2. Set the mode to "Paging";
3. Enter the number to dial;
4. Press

ANSWERING A CALL

When the device is in idle and there is an incoming call, the device will show the call screen as below.
Select "Answer" to answer the call, or reject the call by pressing the "Reject" softkey.
When there is an incoming call during an active call, users will hear a call waiting tone with the LCD
displaying the caller name and ID for the incoming call.
Firmware Version 1.0.1.18
http://arttel.ru/shop/ip-telefony/grandstream-gac2500
to dial out.
to dial out.

Figure 27 GAC2500 Single Incoming Call Screen

GVC2500 User Guide Page 41 of 98