HP 3562A Operating Manual page 87

If a non-averaged measurement is in progress, selecting an averaging type starts the measure­
ment Pressing NEXT displays the next level of the menu:
OVLRP%
OVREJ
ON OFF
FST AV
ON OFF
PRVIEW
OFF
MANUAL
PRVIEW
TIMED
PRVIEW
RETURN
Measurements with Averaging
When averaging is off (the AVG OFF softkey is active), the analyzer makes continual measure­
ments with one average, erasing the result of each measurement The overlap processing
achieves the greatest possible overlap percentage, regardless of the percentage you may
have entered, Overload rejection and previewing are ignored,
Allows you to set the overlap percentage from 0 to 90%,
using the Entry group, The default is 0%,
Selects automatic overload rejection.
Selects fast averaging,
Turns the preview functions off,
Selects manual previewing,
Selects timed previewing: enter the preview delay in
seconds using the Entry group.
Redisplays the first level of the
Off
V l l atJlo;:,:;l !-U;,;)III!;J lito;:,:; 1-11 to;:,:;c:U nC;';)VIUlIUI I IVIVUO
AVERAGING IN THE LINEAR RESOLUTION MODE
menu,
AVa
1-33