HP 3562A Operating Manual page 259

Chapter 11-HP-IB Functions
THE HP-IB FeTN MENU
The
THE HP-IB FCTN MENU
view and set addresses, send user service requests and output HP-IB command strings. For
programming the HP 3562A as an addressable-only device on the bus, please refer to the
HP
HP-IB FCTN
3562A
11-2
menu allows you to identify the HP 3562A as the HP-IB system controller,
Programming Manual.
SYSTEM
Identifies the HP 3562A as the system controller. This is
ADORES
CNTRLR
necessary for plotting, accessing discs and outputting
ONL Y
command strings.
Identifies the HP 3562A as an addressable-only bus
SELECT
device. This is necessary for programming the instrument
ADORES
over the HP·IB with an external controller.
DisplayS:lhe select address menu, which is used to set the
HP 3562A's address and enter the addresses of plotters
USER
and disc drives. See ' 'The Select Address Menu" follow­
SRQ
ing this menu.
Displays the user service request menu, which allows you
OUTPUT
to send eight unique service requests to an external con�
STRING
troller. See "User Service Requests" following this menu.
ABORT
Allows you to output command strings to the HP-IB. See
HP-IB
" Outputting Command Strings" following this menu.
Aborts HP-IB operations.