HP 3562A Operating Manual page 336

PLOT-displays the plot menu, which allows you to select the following:
Combination of data, annotation and grid
The HP 3562A offers direct control of HP,IB compatible digital plotters equipped with Hewlett,
Packard Graphics Language (HP,GL), The plot sof f keys provide control of many plotting varl'
abies; however, plotting can be as simple as pressing PLOT PRESET and START PLOT
ABORT HP,IB-'aborts HP,IB operations,
ANNOT A PEN�used to define the pen number for use in plotting the annotation
associated with trace
imum number of pens allowed by the plotter.
ANNOT B PEN�used to define the pen number for use in plotting the annotation
associated with trace B. The pen number can range from 0 to the max,
imum number of pens allowed by the plotter.
CUT PG ON OFF'-enables the page cutting features on plotters so equipped,
Defaults to off at power'on and after reset and plot preset Note that if page
cutting is active, pages are cut after the plot is finished,
DASHED LlNES�selects dashed lines for use in plotting the display, The default
selection at power,on and after reset and plot preset is SOLID LINES,
DATA & ANNOT'-causes both the data traces and the alphanumeric annotation to be
plotted when START PLOT is pressed. Pressing this also displays the three
grid selection soft keys, This is the default selection at power'on and after
reset and pl o t preset
DATA ONLY-causes just the data trace(s), without the alphanumeric annotation or
the grid, to be plotted when START PLOT is pressed,
DFAULT GRIDS�causes the grids to be plotted exactly as they appear on the
display,
DFAULT LlMITS�uses the plotter's P1 and P2 10cations to define the boundary of the
plot P1 is the lower left corner, and P2 is the upper right corner.
DOTS�selects dotted lines for use in plotting the display, The default selection at
power'on and after reset and plot preset i s SOLID LINES,
Pen numbers
Line types
Paging control
Plot limits
A
The pen number can range from 0 to the max,
vnapIer lL-Uperanng Hererence
PLOT
12-4 7