Kontron K393 Series Technical Manual page 25

System Monitoring
3.4 Monitoring Tools
3.4.1 System Guard
System Guard is a Windows based system monitoring tool. It is available to end-customers.
FTP-Link SystemGuard
SystemGuard ≥ V5.8 required for K39xx.
Features:
Visualize temperature sensor data
Display current speed for attached fans
Display current voltage data and CPU power data
User can configure fan aging control (menu "Special")
System Guard provides warnings if a fan or sensor fails
User can configure system watchdog (menu "Special")
User can enable "full fan speed"
User can enable logging for temperatures, fans and voltages.
„Sensor failed" LED
Temperature Sensors
Available sensors depending on the
current system.
Main voltage sensors
Available sensors depending on the
current system.
CPU status
Shows current system package power
and if CPU throttling is active.
Indicates which sensor influences the specific fan speed
Due to safety reasons, the influence of the CPU sensor
for CPU FAN cannot be disabled!
www.kontron.com
Current sensor value
System Watchdog Status
Sensor / Fan matrix
Technical Manual - Alderlake-N Mini-ITX Industrial series
„FAN StartUp" value
„FAN FullSpeed" value
Note: Sample screenshot. Appearance of SystemGuard may
differ for specific motherboard model and tool version.
FAN state
Shows the RPM of connected FANs.
Shows the alarm state if FAN failed.
Option to force "FullSpeed"
Sensor / FAN alert reset
If a sensor/fan alert is active, reset is
possible by clicking on the label button
25