Uploading And Upgrading; Establishing Communication; Programs And Firmware - Crestron QM-FTCC Operations & Installation Manual

Crestron QM-FTCC

Uploading and Upgrading

SIMPL Windows
Operations & Installation Guide – DOC. 6313B
QuickMedia™ FlipTop Computer Center
Crestron recommends using the latest programming software and that each device
contains the latest firmware to take advantage of the most recently released features.
However, before attempting to upload or upgrade it is necessary to establish
communication. Once communication has been established, files (for example,
programs or firmware) can be transferred to the control system (and/or device).
Finally, program checks can be performed (such as changing the device ID or
creating an IP table) to ensure proper functioning.

Establishing Communication

Use Crestron Toolbox for communicating with the QM-FTCC; refer to the Crestron
Toolbox help file for details. There is a single method of communication: indirect
communication.
Indirect Communication
PC RUNNING
CRESTRON TOOLBOX
SERIAL,
ETHERNET
OR USB
•
QM-FTCC connects to control system via Cresnet.
•
Establish communication between the PC and the control system as
described in the latest version of the 2-Series Control Systems Reference
Guide (Doc. 6256).
•
Use the Address Book in Crestron Toolbox to create an entry for the
QM-FTCC using the expected communication protocol (Indirect). Select
the Cresnet ID of the QM-FTCC and the address book entry of the control
system that is connected to the QM-FTCC.
•
Display the QM-FTCC's "System Info" window (click the
communications are confirmed when the device information is displayed.

Programs and Firmware

Program or firmware files may be distributed from programmers to installers or from
Crestron to dealers. Firmware upgrades are available from the Crestron website as
new features are developed after product releases. One has the option to upload
programs via the programming software or to upload and upgrade via the Crestron
Toolbox. For details on uploading and upgrading, refer to the SIMPL Windows help
file or the Crestron Toolbox help file.
If a SIMPL Windows program is provided, it can be uploaded to the control system
using SIMPL Windows or Crestron Toolbox.
QuickMedia™ FlipTop Computer Center: QM-FTCC • 31
CONTROL SYSTEM
CRESNET
QM-FTCC
icon);