Software Ignition Control - Vecow EAC-5000 User Manual

Step 4: Once the process finished, you should see the following log:

4.3 Software Ignition Control

Vecow provides Ignition Software to control power on/off delay periods.
To activte software ignition control, you need to adjust the JIGNMODE1 jumper
to 2-3, you can access the following path:
$ cd /usr/src/tools/EAC-5000/ignition/
Or
https://github.com/VecowSoftware/EAC-5000_IO_Sample/tree/master/ignition
to find an application for software ignition control.
©Vecow EAC-5000 User Manual SOFTWARE SETUP 53